Friday, December 27, 2019

2020 Nissan TITAN PRO-4X Reveal & Overview


Catch a first look at the reveal of the off-road capable 2020 Nissan TITAN PRO-4X with TITAN Ambassadors Maddie Brenneman, Cory Bahr, and Chef David Rose. Learn More about the 2020 Nissan TITAN here: www.nissanusa.com/2020titan?dcp=snx.ttn.FUT.rev.ytb Off-road capable and loaded with tech - meet the stunning new 2020 Nissan TITAN PRO-4X. Featuring TITAN Ambassador @MaddieBrenneman TITAN not yet available for purchase. Expected availability early 2020. Pre-production model shown; see actual production vehicle when available for final details on features. Please see Owner’s Manual for important feature information.

Wednesday, December 25, 2019

Tuesday, December 24, 2019

Prime Design’s Ergorack- The Drop Down Ladder Rack for Nissan NV200



Watch how Prime Design's ErgoRack allows for productive, safe, and easy loading and unloading of a ladder. With the Ergorack you can load a ladder in 20 seconds or less without risking injury by climbing on a bumper or tire. The ErgoRack fits on almost any commercial van and truck model, wheelbase, and height. Be sure to subscribe to our channel and check out this demo of an Ergorack on a Nissan NV.

Sunday, December 22, 2019

Friday, December 20, 2019

C-TECH Aluminum Tool Drawers

C-TECH Aluminum Tool Drawer - PONSSE North America, Field Technician - Dustin Conley


“CTech provides storage that is custom made any size needed to maximize usable storage out of our trucks. Servicing heavy equipment in all environments from heat, cold, snow and rain, I push my equipment and CTech aluminum drawers never falter. With the ability to create all the organization needed I am able to carry a large inventory of parts that are easily accessible. My CTech units have never caused any trouble and are loaded with large amounts of weight with the truck is used off-road daily. All in all great product and great group of people to work with. Thanks CTech

.”After the Motion Latch handle was such a success in CTech's other products other industries found areas to utilize this product. Drawer units are not a new concept in the Service Truck Body market but CTech drawers changed the market forever with our parametric designed module aluminum drawer units. We offer standard configured tool drawers for all the major truck body manufacturers and in most cases the CTech drawer unit can be added as an option directly from the factory.

Aluminum drawer units are not only used to fill compartments in truck bodies. They can be added to any opening including existing cabinetry you may have in your garage, shop, trailer, truck, van or any other opening.  There are 3 different style of drawer inserts which covers any possible mounting solution. 

Wednesday, December 18, 2019

WeatherGuard Lighted Truck Box Review - Saddle Box with LEDs


Weather Guard makes some waves whenever it announces a new truck box—this one, however, has built-in LED lighting—and takes only about 30 minutes to install! Weather Guard buillt their lighted truck box on their Model 127 and installation really is simple, even for something that requires wiring. Weather Guard Lighted Truck Box with PowerSync https://www.protoolreviews.com/tools/...

Monday, December 16, 2019

Masterack Aluminum Interiors


STANDARD ALUMINUM PACKAGE


Part # 0AS100KP
STANDARD ALUMINUM PACKAGE

This lightweight interior has aluminum shelving, toolbox cradles, full-length drawers, and a full line of
customizable accessories. The aluminum is 30% lighter than steel with the ability to support a comparable capacity. Our aluminum shelf modules are made in the U.S.A. Partitions sold separately.
Learn more at: http://masterack.com/

Saturday, December 14, 2019

Thursday, December 12, 2019

VMAC G30 SOLVES COMMON AIR COMPRESSOR CHALLENGES

Common Air Compressor Challenges


To celebrate the recent launch of the VMAC G30 Gas Engine Driven Air Compressor, now powered by Honda, VMAC ran a G30 Giveaway Contest. (Watch the video on our Facebook page!) In this contest we asked entrants to answer three simple questions. One of these questions asked fleet managers and operators what their top challenges with their current truck-mounted air compressors are. Here are the results:

Common Air Compressor Challenges

With seven options to choose from, the top three results were size, air output and weight, accounting for almost 60% of the responses. The VMAC G30 was designed and engineered to address the concerns fleet managers and operators have with their current equipment.

SIZE

VMAC G30 Gas Drive Air CompressorAir compressor size was the number one challenge our survey identified. The VMAC G30 is 50% smaller* than other competitive air compressors, measuring just 34” (l) x 21.5” (w) x 24” (h), making it small enough to fit on the side pack of a single rear wheel service body. The compact size frees up to 15 cubic feet on the truck body, and leaves more room in the back of the truck for supplies, tools, and equipment. Another bonus is that visibility is improved, as the short height of the G30 means it won’t obstruct the view in the rear window.

VMAC G30 Gas Drive Air Compressor

AIR OUTPUT

Not only is the G30 compact, it is also powerful—50% more powerful* than other competitive air compressors. Producing 30 CFM 100% of the time, the G30 can operate at 100% duty cycle, which means you won’t have to wait for air to build, and you can work without interruption, thanks to continuous air supply. The G30 doesn’t need a large air receiver tank either, which aids in the size challenge.

WEIGHT

Weight challenges are minimized with the VMAC G30, which weighs 50% less* than other competitive air compressors. Weighing just 205 lbs (93 kg), the G30 is over 200 lbs lighter. Not only does every pound of GVW count when building a truck service body, especially because vehicle weight restrictions vary by state, but the Environmental Protection Agency reports that for every 100 lbs of weight reduction, a vehicle’s fuel economy can increase by up to 2%. This means that with 200lbs less weight, the VMAC G30 can save you up to 4% in truck fuel costs.

*Compared to competing 22 to 30 CFM reciprocating gas engine driven air compressors, with 30-gallon air receiver tank.

OPERATING IN COLD TEMPERATURES

Respondents in Canada and the Northeast and Midwestern states noted operating air compressors in cold temperatures to be particularly challenging. To ensure the air compressor can operate in extreme cold, a cold climate kit can be installed on the G30. The G30 with cold climate kit is proven to start-up at temperatures of -30°C (-22°F).**

**Due diligence and additional care may be required for prolonged operation in temperatures reaching below -15°C (5°F).

TRANSFERABILITY

The VMAC G30’s lightweight and compact design makes it easier to transfer than heavier air compressors weighing over 400 lbs. The lifting hook makes for easy installation on the service truck as well.

MAINTENANCE

The VMAC G30 is easy to maintain, with servicing recommended every 200 hours or every 6 months. The compressor is oil injected; oil forms a seal between the rotors so they don’t wear against each other. The G30 compressor doesn’t contain any gears, reed-valves, piston rings, or components that will fatigue or become fouled, which means with proper servicing and operation, the compressor should never require rebuilding. The G30 comes with a VMAC Lifetime Limited Warranty, and the reliable Honda GX390 engine comes with a 3-year warranty (limited).

OPERATING IN HOT TEMPERATURES

Operating air compressors in hot temperatures was a concern for some operators and fleet managers, predominately those located in areas like Texas, Virginia, Arizona, and California. The G30 is proven to operate at temperatures up to 40°C (104°F) and is protected by a compressor oil temperature switch that opens at 140°C (284°F) and shuts down and disables the engine until the oil temperature drops below 139°C (282°F).

MINIMIZE CHALLENGES WITH THE VMAC G30

Each of these seven challenges can be addressed with upgrading your air compressor to the VMAC G30 Gas Engine Driven Air Compressor. Not only is it 50% smaller, 50% lighter, and 50% more powerful, but it is also proven to operate in the most extreme climates. It’s also easy to transfer and maintain, allowing you to spend your time on the job, not struggling with your equipment.

Learn more about the VMAC G30, or find a dealer. You can also find a VMAC Sales Rep—they’ll be happy to answer your questions, and provide you with a demo of the air compressor, so you can see the G30 in action for yourself.

Tuesday, December 10, 2019

Masterack’s rear-seat packages


 Masterack’s new rear-seat packages recently designed for the Nissan Titan King Cab with rear-seat delete allow convenient storage inside the truck cab. The packages add more organization and ease of access to tools and equipment.
 - Photo courtesy of Masterack

Masterack’s new rear-seat packages recently designed for the Nissan Titan King Cab with rear-seat delete allow convenient storage inside the truck cab. The packages add more organization and ease of access to tools and equipment.
 
Nissan has rounded out its pickup lineup with the introduction of a King Cab for its Titan and Titan XD—a configuration that features a commercial application friendly rear seat delete option.
The rear seat delete—a first for its segment—removes the rear seat, rear heater duct and rear roof-mounted assist grips and adds a flat rear load floor and rear wall finisher with tie-down hooks for secure in-cab storage space.

“This feature is going to be extremely well received by commercial truck buyers for its extra utility and secure, climate-safe storage space inside the cab. It’s a real workhorse like the new Single Cab, but with more flexibility to stow equipment and other valuables,” says Fred Diaz, Nissan division vice president and general manager, North America Trucks and Light Commercial Vehicles.

Source:  https://www.worktruckonline.com/306307/8-challenges-upfitting-light-medium-duty-truckshttps://www.worktruckonline.com/306307/8-challenges-upfitting-light-medium-duty-trucks

Learn more at:   https://www.equipmentworld.com/nissan-intros-titan-titan-xd-king-cab-with-rear-seat-delete-option/

Masterack:  http://masterack.com/

Sunday, December 8, 2019

SPITZ LIFT Fold-Down Crane


Load capacity = 900 lbs.
Crane weight = 46 lbs.
Install weight = 99 lbs.

User friendly
Cost efficient

B U I L T T O L I F T

Learn more at: https://spitzlift.com/

Friday, December 6, 2019

Turn Your Pickup Into a Dump Truck with a DumperDogg® Dump Insert


The slide-in DumperDogg Dump Insert from Buyers Products makes it easy to convert your 3/4 ton+ pickup with a 6 or 8 ft bed into a dump truck. The slide-in unit has a 6000 lb capacity and is powered by your truck's electrical. A double-acting scissor hoist provides up to a 45° dump angle. The versatile tailgate opens up or down and can be removed completely, so you can still use your truck like a regular pickup. A number of accessories, including side wall extensions, roll tarp kits, a removable tailgate spreader, and a cab guard are also available. For more information, and to see our complete line of DumperDogg products and accessories, visit https://www.buyersproducts.com/catalo.... Available Models (Click the link for more info): Stainless Steel Models - https://bit.ly/2JeNRqT 5534000 - 8 Foot 5534006 - 6 Foot Carbon Steel Models - https://bit.ly/2xO43q4 5531000 - 8 Foot 5531006 - 6 Foot Poly Model - https://bit.ly/2Fd5fIo 5532000 - 8 Foot

Monday, December 2, 2019

NISSAN - AMERICA'S BEST TRUCK & COMMERCIAL VAN WARRANTY

Nissan work van

5 Years, 100,000 Miles!

Ford - 3 Years/36,000 Miles
Chevrolet - 3 Years/36,000 Miles
Ram - 3 years/36,000 Miles
Toyota - 3 Years/36,000 Miles
Mercedes Benz- 3 Yrs/36,000 Miles